Tripod/Monopod with Ball Head
MFR #RCC-3060-WH
Availability: In-Stock
Key Features
- 30 lb. load capacity
- Four sections
- 10X Carbon-fiber construction
Overview
The Robus RCC-3060-WH is a versatile four-section tripod and head that you can deploy for a wide variety of situations. With a height range of 7.5 to 60 inches, you can set your camera at eye level, or you can opt for setting it slightly above the ground for dramatic low-angle and nature shots. Use the detachable leg as a monopod when mobility is essential for capturing action or sports. Three locking leg angles and a ballast hook deliver stability even on uneven surfaces or hills, and swappable rubber and spiked feet provide stability on hard or soft terrain. For extra functionality, customize your setup by adding an accessory arm to the 1/4-20 accessory socket and mount a light, microphone, or wireless receiver. Sturdy and lightweight 10× carbon-fiber construction is made for shooters on the go, and it ensures you will have a stable platform for your camera at any height, regardless of terrain. The included dual-action ball head adds to the tripod’s versatility by allowing you to tilt and pan quickly without missing a moment. An Arca-type quick-release plate is included for rapid camera mounting and swapping.
Features
Tripod/Monopod
The tripod is great for nature shots, portraits, and even selfies where stability is key. Remove the leg, and the RCC-3060-WH becomes a monopod, so you can chase the action when you’re shooting a soccer game or swim meet.
Dual-Action Ball Head
The dual-action ball head features two locking knobs that separately control the ball and panning movements. The base has a 360° range and degree markings around its circumference to help you set up panoramic shots. The head also features a 90° notch for instant switching between landscape and portrait orientation.
Converts to Monopod
One of the tripod’s legs is removable and becomes a monopod when mobility is essential for capturing action or sports.
Carbon Fiber
The RCC-3060-WH’s legs are constructed with strong and durable 10× carbon fiber. Lightweight and strong, carbon fiber construction allows a maximum load of 30 pounds, which is enough to support a heavy camera setup plus a stabilizing counterweight.
Ultimate Stability at Any Height
By providing adjustable height without a center column, the RCC-3060-WH offers solid stability at any level. Center columns can compromise the stability of your camera by moving the center of gravity away from the tripod’s foundation. By attaching the ball head directly onto the tripod’s mounting base, your camera’s stability is ensured, even during long exposures.
Leg Angle Locks
Three leg angles are secured by leg angle locks. Whether you’re shooting at the maximum height or a few inches off the ground, you can shoot with the confidence that the tripod is stable, even with the maximum load capacity.
Arca-Type Quick-Release Plate
The Arca-type quick-release plate lets you attach your camera quickly and effortlessly. And if the plate is already attached to the base of your camera or camcorder, you’re already prepared to start shooting. With a quick-release plate attached to all your cameras, swapping them out on the tripod will take just seconds.
Swappable Feet
Rubber and spiked feet are included with the tripod, so the RCC-3060-WH will be as steady on soft terrain as it is on solid ground. You can quickly and easily swap the rubber feet and steel spikes to match the surface you’re shooting on.
Twist Locks
The RCC-3060-WH’s twist locks are designed to maintain a firm connection between the leg sections, and they make altering the leg length effortless.
Compact Design
The lightweight carbon fiber RCC-3060-WH tripod is built for travel. It folds down to less than 2 feet for portability. It will fit into your carry bag, but it’s light and small enough that you can even carry it under your arm.
UPC: 847628538849